MF7xx
PROMAG
REV.C
14
Test MF7XX Reader after configuration
After MF7XX configuration is completed you may use MF7XX Utility “Test” function to test the MF7XX to see if
the configuration is done correctly.
1. After the configuration on the MF7XX Utility software is made, you should click [Update Reader] to
download the current configuration to the MF7XX Reader.
2. After MF7XX configuration is completed, you may click [Test] to test MF7XX Reader.
3. Get an issued mifare
®
card to put on MF7XX reader to be read and see the output data on the window of
“MF7XX Output Test”.
Wiegand 34 bits output data with standard bit sequence, example as below:
