Page 24
6.
AFTER USE
Step 1
As soon as the measurement is fi nished and the Delirium Probability is calculated,
disconnect the Patch connector from the DeltaScan Patch and remove the DeltaScan
Patch (and HairLock too, in case a HairLock is used) from the patient’s head.
Remove residue of the Ten20 paste from the patient’s head with warm water or a
Dynarex wipe.
Warning!
Remove the DeltaScan Patch immediately from the patient’s head, after
measurement.
Please note!
The DeltaScan Monitor switches OFF automatically if is it not used for 5
minutes.
Step 2
Store the DeltaScan Monitor on a convenient location.
If necessary, plug the charger in the DeltaScan Monitor to charge the battery.
Please note!
Only charge the battery when the DeltaScan Monitor is not connected to a
patient.
Please note!
Make sure the Patch connector cable and recording button cable are
stored in such a way that they do not damage.
