PRC2402M User Manual v1.1
Page 7 / 49
Setting up the PRC2402M as a Mesh Node
PRC2402M is a Mesh-Ready device. To set up your mesh system, you will need at least two
units of PRC2402M. First unit is to be connected to main Internet source (known as Mesh
Router) and the second PRC2402M as the Mesh Node unit.
You may add additional PRC2402M to your existing PRC2402M Mesh System as Mesh Node.
This will help increase the coverage of your wireless coverage.
For Starter Kit (3-Unit or 2-Unit), all the node(s) has been pre-paired with the Mesh Router Unit
from the box. Please follow Option 1 or Option 2 as described below to add a 1-Unit to existing
mesh system.
Option 1: Via Physical Pairing Button
Step 1. Place the new Mesh Node unit near the existing Mesh Router Unit
Step 2. Plug the Mesh Node unit with the provided power adapter and power on.
Step 3. Wait for the unit to fully boot up, indicated by LED Blinking Red
Step 4. Press and Hold the
Pair Button
for Two Seconds on Mesh Router Unit.
When the pairing is activated, the LED will be Blinking Blue
Step 5. Press and Hold the
Pair Button
for Two Seconds on the Mesh Node Unit. When
the pairing is activated, the LED will be Blinking Blue
