EN 3
2.2.
Quick Installation and Usage
There are only three things that you need to do to see the video from the
IP Camera
.
1.
Connect the
IP Camera
to the home/office network.
2.
Install the
LiveView Software
on the notebook/PC.
3.
Key in the ID/password of the
IP Camera
on the LiveView, and then you can see the video.
2.2.1.
First, Connect the IP CAM to the home/office network
Please connect the
IP Camera
accessories to the
IP Camera
body correctly, including the power
adapter and Ethernet cable. And connect the other end of the Ethernet cable to the home network or
office network. Usually, this Ethernet cable is plugged into a home NAT/router device or an Ethernet
switch if in the office (as shown in Figure 2-2). Since the default settings of the
IP Camera
use DHCP
function and very often there is a DHCP server on most of the Home/office network, the
IP Camera
should be connected to the Internet immediately. The Internet status LED is constant red light to
indicate this good connection status. If the LED is blinking, please refer to section 3.3~3.5 to try other
network settings.
Figure 2-2: Connect Ethernet cable to a switch/router.
2.2.2.
Second, Install the LiveView Software on the notebook/PC
Please insert the installation CD into the CD-ROM drive in your notebook
or personal computer (must be running Microsoft Windows OS). Execute
the program LiveViewInstaller-xxx.exe on the disk. The program will pop-
up some windows about the installation options, please press the “next”
button to proceed with the installation. After the installation is complete,
there will be a LiveView icon on the desktop of your computer screen,
please execute this icon. The LiveView program will run immediately.
Figure 2-3: Setup CD
