PROLiNK Hurricane 9300G User Manual Download Page 58

Page: 58 / 112

Hurricane 9300G (802.11g) ADSL2+ Modem Router

Chapter 4: Configuration

Firmware Upgrade

Your router’s “firmware” is the software that allows it to operate and provides all its functionality.

Think of your router as a dedicated computer, and the firmware as the software it runs. Over time

this software may be improved and modified, and your router allows you to upgrade the software it

runs to take advantage of these changes.

Clicking on

Browse

will allow you to select the new firmware image file you have downloaded to

your PC. Once the correct file is selected, click Upgrade to update the firmware in your router.

Warning

DO NOT power down the router or interrupt the firmware upgrading

while it is still in process. Improper operation could damage the router.

Summary of Contents for Hurricane 9300G

















































































































Search results

Summary of Contents for Hurricane 9300G

Reviews:

Related manuals for Hurricane 9300G

Brands by name

Popular brands

PROLiNK Hurricane 9300G, User Manual

Search results

Summary of Contents for Hurricane 9300G

Reviews:

Related manuals for Hurricane 9300G

Brands by name

Popular brands