PROLiNK Hurricane 9300G User Manual Download Page 50

Page: 50 / 112

Hurricane 9300G (802.11g) ADSL2+ Modem Router

Chapter 4:Configuration

IPoA Routed Connections

Description:

User-definable name for the connection.

VPI/VCI:

Enter the information provided by your ISP.

ATM Class:

The Quality of Service for ATM layer.

NAT:

The NAT (Network Address Translation) feature allows multiple users to access the Internet

through a single IP account, sharing a single IP address. If users on your LAN have public IP

addresses and can access the Internet directly, the NAT function can be disabled.

DHCP client:

Enable or disable the DHCP client, specifying if the router can obtain an IP address

from the Internet Service Provider (ISP) automatically or not. Please click

Obtain an IP address

automatically via DHCP client

to enable the DHCP client function or click

Specify an IP address

to disable the DHCP client function, and specify the IP address manually. Your ISP specifies the

setting of this item.

RIP:

RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

MTU:

Maximum Transmission Unit. The size of the largest datagram (excluding media-specific

headers) that IP will attempt to send through the interface.

Summary of Contents for Hurricane 9300G

















































































































Search results

Summary of Contents for Hurricane 9300G

Reviews:

Related manuals for Hurricane 9300G

Brands by name

Popular brands

PROLiNK Hurricane 9300G, User Manual

Search results

Summary of Contents for Hurricane 9300G

Reviews:

Related manuals for Hurricane 9300G

Brands by name

Popular brands