Reversing the door
Warning! When changing the way the door opens, the appliance must not be connected to the mains.
Remove the plug from the mains before working on the door.
1.
Remove the two screws (6) and remove the worktop by raising the rear and pushing it forwards.
2.
Remove the two screws (1) and remove the upper hinge (5) from the right side of the
cabinet
.
3.
Lift the door off the lower hinge pin and place in a safe location to avoid damaging it.
4.
Remove the
foot(3),
t
wo
screws (8) and remove the lower hinge (2) with hinge pin (9).
5.
Unscrew the left front foot (4) and transfer to the right side.
6.
Unscrew the hinge pin (9) from the lower hinge (2)
WXUQDURXQGWKHORZHUKLQJHVFUHZWKHKLQJH
SLQL
nto the o
pposite hole in the same
side.
7.
Screw the lower hinge (2) into place on the bottom left side with the two screws (8).
8.
Screw the foot(3) into place on the bottom left side.
9.
Slot the door onto the lower hinge pin and align with the cavity opening in its closed position.
10.
Remove the blanking plug from the hole on the top left of the door and transfer to the right side.
11. Screw the upper hinge (5) into place with screws (1) on the top left side of the
cabinet
.
12. Make sure the hinge pin on the top hinge locates in the hole in the top left of the door.
13. Make sure you have tightened all the screws securely.
14. Re-fit the worktop in reverse order of step 1.
DIAG RAMS SHOW LEFT AND RI GHT MOUNTING OF THE DOOR
8
