Downloaded from www.vandenborre.be
1
GB
ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information.
The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three pin socket, suitably
earthed.
The appliance is supplied with a rewireable 13 amp 3 pin mains plug fitted with a 5 amp fuse. Should the fuse require
replacement, it must be replaced with a fuse rated at 5 amp and approved to BS1362.
If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason, then the old plug
should be disposed of safely to prevent the hazard of electric shock.
There is a danger of electric shock if the old plug is inserted into any 13 amp socket outlet.
+RZWRZLUHDDPSSOXJ
Important
The wires in the mains lead on this appliance are coloured in accordance
with the following code:
Blue – Neutral
Brown – Live
As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows.
The blue wire must be connected to the terminal marked N or coloured black.
The brown wire must be connected to the terminal marked L or coloured red.
No wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol
or coloured green and yellow.
The mains lead MUST be secured under the cord clamp.
WARNINGS:
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance is intended for domestic household use only and should not be used for any other purpose or in any
other application, such as for none domestic use or in a commercial environment.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in
use.
Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
