ProLights Zenith 700SPOT, User Manual

Page: 58 / 68

Z700SPOT
24
Lamp Off
Lamp On
Off
On
Turn on/off the lamp
On/ Off
Lamp Off while power on
Lamp On while power on
Off
On
Lamp state while power on
State/ Power On
Turn off the unit via DMX controller
Off Via DMX
To Disable
To Enable
No
Yes
Turn on the lamp when detect-
ed DMX signal
On if DMX On
To Disable
To Enable
No
Yes
Off if DMX Off
Turn off the lamp when cut off
DMX signal
To Disable
To Enable
No
Yes
Cooling Mode
Turn off the lamp when cut off DMX
signal
Adjust the fans speed automatically
Fans always run in high speed
Auto
High
Ignition Delay
Delay time between power on and
lamp on
0s
255s
Low Power Delay
Delay time between reduce lamp
power and shutter off the unit.
0s
255s
3 .1 2 LAMP SETTINGS
It is possible to change the device parameter values in the following way:
t Press the MENU button and select through the directional buttons the [
Lamp Setting
] menu voice, then
press the ENTER button to confirm the choice.
t
Select the parameter to be changed between [
On/ Off
], [
State/ Power On
], [
Off via DMX
], [
On if DMX On
], [
Off if DMX
Off
], [
Cooling Mode
], [
Ignition Delay
], [
Low Power Delay
] and press the ENTER button to confirm the choice.
t
Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
t
Press the MENU button to go back or wait one minute for automatic exit from the menu.