ProLights Zenith 700SPOT, User Manual

Page: 43 / 68

9
Z700SPOT
2 . 3 MOUNTING
The Z700SPOT may be set up on a solid and even surface. By means of the fixing facilities of the base plate,
the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.4. For fixing, stable
mounting clips are required. According to the figure, the bolts of the brackets are placed into the openings
provided in the base plate and turned clockwise until they lock (to the stop). The mounting place must
be of sufficient stability and be able to support a weight of 10 times of the unit’s weight.
Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Fig.4
Fig.6
Fig.5