15
STUdiocoBfc
3.14 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Dimmer
• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times
until shows
Dimmer Mode
, and press the button ENTER to confirm.
• Press the button UP/DOWN to select
Off - Dimmer 1 - Dimmer 2 - Dimmer 3 - High Reactive.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
BackLite
• To activate Backlight display press the button MENU so many times until shows
Back Light
, and press
the button ENTER to confirm.
• Press the button UP/DOWN to select
On - 10S - 20S - 30S.
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
Fan Mode
To set the rotation speed of the fans refer to the following procedure:
• Press the MENU key repeatedly until the display shows
Fan Mode
, then press the button ENTER.
• It is possible choose the speed of rotation of the fans from: fast (
High
) and automatic (
Auto
). Select
by pressing UP/DOWN one of the following options:
Auto - High
. Press the MENU button to go back
or wait a few seconds to exit the setup menu.
LED Frequency
• To adjust the frequency of the LEDs, press the MENU button repeatedly until the display shows
LED
Frequency
, and then press the ENTER button.
• Select the frequency (
600 Hz - 1200 Hz - 2000 Hz - 4000 Hz - 25 kHz)
using the UP/DOWN buttons.
• To confirm, press the ENTER key.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.15 FIXTURE INFORMATION
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
• Press the button MENU so many times until shows
Information
, then press the ENTER button to confirm.
• Using the button UP/DOWN to select
Auto Test
.
• To confirm and start the automatic test press the ENTER button.
Fixture Hours
Show the fixture working hours.
• Press the button MENU so many times until shows
Information.
Press the button ENTER to confirm
• Using the button UP/DOWN to select
Fixture Hours,
then press the button ENTER to confirm
• Then the display will show the working hours.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically
Summary of Contents for STUDIOCOBFC
