11
SOLAR48Q
• Press the MENU button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select
Set Up
, then press the ENTER button ac-
cess the next menu.
• Press the UP/DOWN button to select
Screen
and press the ENTER button to proceed.
• Select the proposed option with the UP/DOWN button and press the ENTER button to confirm.
-
Backlight
- Auto Off display backlight. This function allows you to switch off automatically the back-
lighting of the display after a certain time which can be set using the directional keys. To have the
display always on select On or set a value between those shown (
10s, 20s, 30s
) to turn off the display
once the chosen time has elapsed, after exiting the menu.
-
Flip Display
- Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select
Yes
to activate the function,
No
to
deactivate it.
-
Key lock
- With this function, you can lock the keys on the control panel to prevent, for example, tam-
pering with the settings. If this function is activated, the keys are locked automatically. To disable or
temporarily disable or disable the key lock function, press the keys in the following order to regain
access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select
Yes
to activate the function or
No
to deactivate it.
• Press the MENU key repeatedly to exit the menu and to save the changes made.
3.8 FIXTURE SETTINGS
You can change the parameters for the device by following these steps:
• Press the MENU button to enter the menu mode.
• Use the UP/DOWN buttons to select the
Advanced
. Press the button ENTER to confirm.
• Press the UP/DOWN buttons to select the desired option and press the ENTER button to confirm:
-
Full On Mode
- Select the
Full on Mode
function to set the
HB
mode (High Brightness Mode, with the
maxinum value of the colors) or
Studio
mode with a automatic white calibration.
-
Dimmer Mode
- Adjusting the dimmer. Enter in
Dimmer Mode
to select specific dimming curve.
Particularly when set:
•
Off:
The increase in light intensity is linear.
•
Dimmer 1:
dimmer curve with low fade.
•
Dimmer 2:
dimmer curve with medium fade.
•
Dimmer 3:
dimmer curve with high fade.
-
White Balance
- White Balance function. Select the
White Balance
function to set the white balance by
changing the values (
125-255
) of the colors
Red, Green, Blue and White
.
-
LED Frequency
- To adjust the frequency of the LEDs. Select the frequency
600 Hz - 25 KHz
using the UP/
DOWN and press on ENTER to confirm the selection.
-
Factory Reload
- To reset the unit. Select
Yes
or
No
and select ENTER to confirm.
• Press repeatedly the MENU button to return the menu mode.
3.9 INFORMATION
To view all the information on the device, proceed as follows:
• Press the MENU button to access the main menu. Press the UP/DOWN button to select
Information
, then
press the ENTER button to access the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information-
and press the ENTER button to display it.
-
Fixture Time
- To view the operating time of the projector.
-
Software Version
- To view the firmware version will show on the display.
-
UID
- To view the identification ID for the RDM control.