9
SOLAR48Q
3.4 DMX ADDRESSING
To set DMX addressing follow the instructions below:
• Press the MENU button to enter the menu mode.
• Use the buttons UP/DOWN to select
Connect
. Press the ENTER button to confirm.
• Press the UP/DOWN buttons to select
DMX Address
. Press the ENTER button to confirm.
• Press the UP/DOWN buttons to select the desired value
001-512
. Press the ENTER button to confirm.
• Press repeatedly the MENU button to return the menu mode.
To able to operate the SOLAR48Q with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the SOLAR48Q. The other functions of the light effect panel are
then automatically assigned to the following addresses.
Several units may be interconnected; follow the instructions below:
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture (see page 16).
Number of
DMX chan-
nels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
5
33
33-37
38
43
48
7
33
33-39
40
47
54
10
33
33-42
43
53
63
17
33
33-49
50
67
84
22
33
33-54
55
77
99
ð
Static
ð
R
G
B
W
GB
RB
RG
RGB
RW
GW
BW
RGW
RBW
GBW
RGBW
Manual color
ð
Red
ð
<000-255>
