PROLIGHTS - SmartBat
Wash
17
DIMMER
SPEED
AUTO
Set Dimmer Speed.
This parameter defines interpola
-
tion of DMX Changes for main
functions.
Off turns off interpolation
FAST
MEDIUM
SLOW
LED
FREQUENCY
600HZ
Select PWM frequency.
1200HZ
2000HZ
4000HZ
6000HZ
25KHZ
RUN TIME
3H
Select Run Time of the fixture.
2H: Max power available 30W.
6H: Max power available 12W.
8H: Max power available 9W.
12H: Max power available 6W.
18H: Max power available 4W.
Run Time is calculated using
fixture RGBW @ Full with
Calibration on.
6H
8H
12H
18H
IR SETUP
ON
Enable/Disable
IR
Remote
control.
OFF
DMX
FAULT
HOLD
Define the behaviour of fixture in
case of DMX signal lost.
BLACKOUT
STAND ALONE
EMERGENCY
AC
FAULT
NO ACTION
Define the behaviour of fixture
in case of AC/DC signal lost. AC
Fault has priority over DMX Fault.
BLACKOUT
EMERGENCY
AC
MODE
NO ACTION
Define the behaviour of fixture
in case of
AC/DC signal presence. AC
Mode has
priority over DMX Fault.
BLACKOUT
BATTERY
RECHARGE
AUTO
AUTO: Fixture will charge im
-
mediately in case of no signal at
startup.
Fixture will charge after 10mins of
signal present with dimmer @ 0.
Fixture will run over AC/DC Pow
-
er while signal present without
charging battery.
DISABLE: Recharge disabled, fix
-
ture will run over AC/DC Power
without charging battery.
ENABLE: Recharge forced, fix
-
ture will go blackout and start
charging battery immediately.
DISABLE
ENABLE
TUNGSTEN
EMULATION
ON
Enable/Disable
Tungsten
emulation.
OFF
FACTORY
RELOAD
ON
Reload fixture with Standard set
-
tings.
OFF
4
INFORMATION
DEVICE
TIME
FIXTURE HOURS
<99999H>
To view infromation about the
unit
CURRENT HOURS
<99999H>
SOURCE
HOURS
<99999H>
AC POWER
ON CYCLE
<300>
MAINTENANCE
TIME
ELAPSED TIME
ALERT PERIOD
10 - 300
POWER
CONSUMPTION
CONSUMPTION,
VOLTAGE,
CURRENT
TEMPERATURE
BATTERY
CYCLE
<300>
BATTERY
STATE
<100%>
ESTIMATED
BATTER
LIFE
3h 5m
WIRELESS
QUALITY
CHANNEL
VALUE
ERROR
MESSAGE
