29
RAZOR440
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
-
Time Information
- Through the Time Information function you can display the operating time of the
projector.
-
Lamp Info
- Through the Lamp Info function you can display the lamp information.
-
Temperature
- Through the Temperature function can be displayed the temperature inside the fix-
ture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
-
Fans Speed
- Through the Fans Speed function you can show on display the fan speed present near
the lamp. Velocity is expressed in RPM (revolutions per minute).
-
Channel Value
- Channel Value function can be used to display the values of the channels by which
the unit will operate when switched on.
-
Error Message
- Through the Error Message function can be displayed any errors channels.
-
Fixture Model
- Through the Fixture Model function can be displayed the model number and manu-
facturer.
-
Software Version
- Through Software Version function you can display the currently installed software
version.
• Press the LEFT button repeatedly to exit the menu.
3.21 RESET FUNCTIONS
You can start a preset program to restore the selected function:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset be-
tween
All, Pan&Tilt Shutter Colors Gobos e Others
.
• Press the ENTER button to confirm your choice and wait for the recovery of the selected function.
3.22 SPECIAL FUNCTIONS
For the RAZOR440 you can access the following special functions:
No Signal
Select this feature to set the preferred mode of operation to be activated in case the drive is not present
no DMX signal input:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Set
icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select
UI Set
, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select
No Signal
and press ENTER to con-
firm.
• Press the UP/DOWN button to select the preferred mode of operation:
Close/Hold/Auto/Music
.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Fans Mode
Select this function to set the fans operation mode:
Summary of Contents for RAZOR440 HYBRID BEAM
