15
RAZOR440
3.7 MUSIC MODE
In music mode, via its integrated microphone, the unit can be controlled by music with a clear rhythm in
the bass range. If the music control should not work optimally, increase the volume or reduce the distance
between the sound source and the light effect unit or alternatively increase the sensitivity of the micro-
phone.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Program
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Play
and press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Music
and press ENTER to confirm.
• Press the UP/DOWN button to select the mode of operation:
-
Master
, if the mobile head is connected in series to other units, and it performs the Master function;
-
Alone
, if the fixture is not connected to other units.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The unit will go into music mode by executing an automatic program to the rhythm of music.
3.8 SENSITIVITY MICROPHONE
Select this function to set the value of the sensitivity of the microphone for use with a music control:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Set
icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select
UI Set
, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select
Mic Sens.
and press ENTER to confirm.
• Press the UP/DOWN button to adjust the level of sensitivity of the microphone, and then press the
ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.9 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.10 DMX MODE
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Connect
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the
DMX Address
and press the ENTER key.
• Press the arrow keys to select the desired value (
001-512
).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
Summary of Contents for RAZOR440 HYBRID BEAM
