PANORAMA IP AIRBEAM
18
• Press the UP/DOWN button to scroll through the menu, select
Edit Scene 001 - Edit Scene 250
, then press the
ENTER button to confirm.
• Press the UP/DOWN button to select the desired function you want to edit (Control, Tilt, etc..), Then
press the ENTER button to confirm.
• Press the UP/DOWN button to change the value of the function, then press the ENTER button to
confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
SLAVE RECEIVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect.
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 differ-
ent Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous
loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit was as-
signed to.
For example, if a slave device is set to Receive Part 1, the Master unit Slave unit will send the automated
Chase Part 1; if set to Receive Part 2, the Chase Part 2 Slave units will receive from the Master.
To set the drive as a slave, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
StandAl
one icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, and then select
Play
and press the ENTER
button to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, and select
Slave Receive
and press ENTER to
confirm.
• Press the UP/DOWN button to select the different modes of operation
Part 1 Receive/Receive Part 2/Part 3
Receive
, and then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Select the desired program on the master unit (described in section 3.5).
Use the DMX connectors of the PANORAMAIPAB and an XLR cable to form a chain of units.
SCENES RECORD MODE
PANORAMAIPAB is equipped with a built-in DMX recorder by which you can transmit the programmed
scenes from your DMX-controller to the device. Proceed as follows to store the sequence of scenes in the
unit.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the
Stand A
lone icon, then press the EN-
TER button to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Scenes Record
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to adjust the scene at the beginning and end to be inserted in the auto-
matic program, then press the ENTER button to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
When recalling scenes from the controller will automatically be transmitted to the device.
