11
PANORAMA IP AIRBEAM
3.4 CONNECT
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.5 DMX ADDRESSING
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select
Connect
, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select
Address
and press the ENTER button to
enter the next menu.
• ress the UP/DOWN button to scroll through the menu, select
Address/W-DMX/Art-Net
and press ENTER to
confirm your choice.
• Press the arrow keys to select the desired value (
001-512
).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
3.6 DMX MODE
The PANORAMAIPAB has 4 DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select
Connect
, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select
DMX Mode
and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Mode
and press ENTER to confirm your
choice.
• Use the UP/DOWN button to select the desired DMX channel configuration (
Standard, Extended, Basic,
User
), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The tables on page 17, 18, 19, 20, 21, 22, 23, 24 show the mode of operation and their values DMX.
3.7 WIRELESS
To enable wireless control mode, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select
Connect
, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll the menu, select
Wireless
, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select
DMX Out
and press ENTER to activate the
wireless mode.
• Press the UP/DOWN button to scroll through the menu, select
Reset Connect
to reset the wireless con-
nection of the unit.
• Press the LEFT button repeatedly to exit the menu and save changes.
