ProLights EclPanel TWCXL, User Manual

Page: 21 / 96

PARAMETER PID GET SET
DEVICE_MODEL_DESCRIPTION 0x0080 x
MANUFACTURER LABEL 0x0081 x
DEVICE_LABEL 0x0082 x x
FACTORY_DEFAULTS 0x0090 x x
SOFTWARE_VERSION_LABEL 0x00C0 x
DMX_PERSONALITY 0x00E0 x x
DMX_PERSONALITY_DESCRIPTION 0x00E1 x
DMX_START_ADDRESS 0x00F0 x x
SENSOR_DEFINITION (LED temperature sensor) 0x0200 x
CURVE 0x0343 x x
CURVE_DESCRIPTION 0x0344 x
OUTPUT_RESPONSE_TIME 0x0345 x x
OUTPUT_RESPONSE_TIME_DESCRIPTION 0x0346 x
MODULATION_FREQUENCY 0x0347 x x
MODULATION_FREQUENCY_DESCRIPTION 0x0348 x
DEVICE_HOURS 0x0400 x
DISPLAY_INVERT 0x0500 x x
IDENTIFY_DEVICE 0x1000 x x
19
PROLIGHTS - EclPanel
TWCXL
11 - RDM FUNCTIONS
The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.