CCT
Dimmer (000÷255)
Use the 1st rotary knob to set the Dimmer value
Tint
(-25/+25)
Use the 2nd rotary knob to choose the tint (+/-
green) value.
CCT
(2800K ÷ 10000K)
Use the 3rd rotary knob to select the CCT value.
HSI
Dimmer (000÷255)
Use the 1st rotary knob to set the DImmer value.
Hue (000÷255)
Use the 2nd rotary knob to choose the color point.
Saturation (000÷255)
Use the 3rd rotary knob to select the Saturation
of the selected color.
XY
Dimmer (000÷255)
Use the 1st rotary knob to set the Dimmer value
X (0.00÷0.85)
Use the 2nd rotary knob to set the X coordinate value.
Y (0.00÷0.85)
Use the 3rd rotary knob to set the Y coordinate value.
Color Macro
Dimmer
Macro
Color gel list:
Open, Red, Green, Blue, Cyan, Magenta, Yellow,
Dirty White, Alice Blue, Congo Blue, Dark Steel
Blue, Deep Lavender, Lilac Ting, Daylight Blue,
Flame Red, Bastard Amber, Deep Orange,
Pale Gold, Apricot, Bright Blue, Primary Green,
Special Lavender, Pale Lavender, Deep Golden
Amber, Medium Blue, Bright Pink, Mauve,
Dark Green, Lee Green, Dark Blue, Light Blue,
Steel Blue, Medium Blue-Green, Peacock Blue,
Magenta, Dark Pink, Middle Rose, Light Salmon,
English Rose, Light Rose, Orange, Deep Amber,
Straw, Light Amber, Spring Yellow, Dark Yellow
Green, Just Blue, Sky Blue, Lavender, Light
Lavender, Pink Carnation, Medium Pink, Light
Pink, Sunset Red, Dark Amber, Gold Amber,
Medium Amber, Fire, Surprise Peach, Straw Tint,
Medium Yellow, Lee Minus Green, Pale Gold,
Orange, Deep Straw, Rose Purple, Deep Purple,
Soft Green
Color
Temperature
2800K
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
7000K
7500K
8000K
8500K
9000K
9500K
10000K
Hue
(-025÷025)
Dimmer
(000÷255)
Select a predefined White CCT output from the
list.
Fixed Color
R
G
B
W
GB
RB
RG
RGB
RW
GW
BW
RGW
RBW
GBW
RGBW
Select of the following predefined color combination and
its Dimmer value.
After enabled this mode, the unit will be automatically
assigned as Master.
Manual Color
Red
Green
Blue
White
User generated color preset by assigning values
to each primary color attribute.
After enabled this mode, the unit will be automatically
assigned as Master
STANDALONE BEHAVIOUR
Fixture will have two different behaviour between Standard or Film factory reload.
STANDARD
If no Standalone mode selected, after unplugging DMX signal fixture will keep last DMX frame.
If a Standalone mode was previously selected, after unplugging DMX signal fixture will go into Standalone mode selected.
If fixture is booted up without DMX signal plugged in It will go into selected Standalone Mode.
FILM
If no Standalone mode selected, after unplugging DMX signal fixture will keep last DMX frame.
If a Standalone mode was previously selected, after unplugging DMX signal fixture will keep last DMX frame, as soon as knobs are
touched fixture will activate selected standalone.
If fixture is booted up without DMX signal plugged in It will stay in Blackout also if a Standalone mode was selected previously, as soon
as knobs are touched fixture will activate selected standalone.
PROLIGHTS - Ecl Panel
TWCM2X1
18
