ProLights CUBER128, User Manual

Page: 25 / 36

9
CYBER 128
If you wish to copy a scanner’s reverse channel assignments to another scanner, continue by following
steps 5-11. If you do not wish to do this, press and hold [PROGRAM] & [STEP/DIS] buttons times to exit mode.
Example: Copying Scanner 1 into Scanner 2
5. Press and hold [FIXTURES] button # 1.
6. While holding button # 1 press [FIXTURES] button # 2.
7. While holding
[FIXTURES]
buttons # 1 and # 2, press and hold
[MUSIC/ADD]
button.
8. Release [FIXTURES] button # 1 first before releasing [FIXTURES] button # 2.
9. Release [MUSIC/ADD] button.
10. All FIXTURES LED indicators will flash to confirm successful copy.
11. Press and hold [PROGRAM] & [STEP/DIS] buttons times to exit mode.
3.4 FADE ASSIGNMENT (Optional Setup)
Use this feature to turn the fade slider on or off for a certain channel. This is most useful when you want the
fade time to affect the pan/tilt of a fixture for smoother movements, but do not wish to use this function
on things such as shutter or color or gobo, as these should switch very fast most times.
1. Press and hold [BLACKOUT] & [STEP/DIS] buttons together times to access the channel assignment
mode; then press the [FIXTURES] button.
2. Select [FIXTURES] .
3. Move the [SPEED] fader until you arrive at the controller channel you wish to alter.
4. Move the
[FADE TIME]
fader all the way up until N changes to Y.
5. Press the [MUSIC/ADD] button.
6. Release [MUSIC/ADD] button.
7. All FIXTURES LED indicators will flash to confirm successful setting.
8. Press and hold [BLACKOUT] & [STEP/DIS] buttons times to exit mode.
3.5 BLACKOUT
The [BLACKOUT] button brings all lighting output to 0 or off (also called the home position of the unit).
3. 6 RESET TO FACTORY DEFAULT
• Press the [STEP UP] and [AUTO/DEL] buttons simultaneously.
• All LEDs will flash, indicating a successful reset of the controller.
NOTE - This will erase all saved Chases!
This will work in any mode: Program or Playback.