ProLights CUBER128, User Manual

Page: 21 / 36

5
CYBER 128
1.3 OPERATING ELEMENTS AND CONNECTIONS
On
Off
12V DC
500mA
Power In
DMX
polarity select
DMX OUT
Fig.1
1
8 9
10
11
13 14 15 16 17 12
7 5 6
2 3 4
Front panel
Rear panel
1. DMX switch - used to select DMX polarity
2. DMX OUT (3-pole XLR):
1= ground, 2 = DMX -, 3 = DMX +
3. DC INPUT - 12V DC 500mA
4. POWER switch - This switch turns On/Off the
power.
5. FIXTURES buttons - choose desired projector
6. PAGE SELECT - used to select page between
Page A (Ch. 1-8) and Page B (Ch. 9-16).
7. CHANNEL faders - for adjusting DMX value.
Channel 1-8 can be adjusting directly after
pressing the respective fixtures select button.
Channel 9-16 can be adjusting after pressing
the page select button.
8. SPEED slider - used to adjust the chase speed
withing the range of 0,1 seconds to 10 minutes.
9. FADE TIME slider - used to adjust the fade
time. Fade time is the amount of time it takes
for a scanner (or scanners) to move from one
position to another, for the dimmer to fade in
or fade out.
10. CHASES buttons - these buttons are used for
activating the chase of programmed scenes.
11. BLACKOUT button - tap to momentarily pause
whole output.
12. PROGRAM button - activates program mode.
13. STEP UP/DOWN buttons - scroll up/down
through steps in a scene during programming
and playback.
14. MUSIC/ADD button - used to activate Music
mode and as the confirm command during
programming
15. AUTO/DEL button - used to activate Auto
mode and as the delete function key during
programming
16. LED DISPLAY
17. STEP/DIS button - used to change steps and
modify the display from 0-255 or 0-100%