BEAMROLL8W
10
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
12
33
33-44
45
57
69
The projector has different configurations of DMX channels the values of which see tables on page 12.
•
To set the DMX address, press the button MENU so many times until shows
Addr,
then press the button
ENTER to confirm.
•
Press the button UP/DOWN to select the desider value
(001 - 512),
then press the button ENTER to con-
firm.
•
Hold and press the button MENU for three seconds to exit the menu mode.
To able to operate the BEAMROLL8W with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the BEAMROLL8W. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Fig.4 - Example 12 DMX channels configuration
DMX Address: 33
DMX Address: 69
DMX Address: 45
DMX Address: 57
DMX512 Controller
. . . . . . . . . . . .
Summary of Contents for BEAMROLL8W
Page 1: ...MANUALE UTENTE USER MANUAL BEAMROLL8W IT EN MULTI BEAM PROJECTOR ...
Page 19: ......
Page 39: ......
