21
CROMOSPOT300
Reset function
•
Press the button MENU so many times until the display shows
[SETTINGS]
, then press the button
ENTER.
•
Press the button UP/DOWN to select
[DEFAULT]
, press ENTER button to confirm the choice.
•
Select
[YES]
in order to reset the default values.
•
Press the ENTER button to confirm
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
Send function
•
Press the button MENU so many times until the display shows
[SETTINGS]
, then press the button
ENTER.
•
Press the button UP/DOWN to select
[SEND]
, press ENTER button to confirm the choice.
•
Select
[YES]
to send all settings to all fixtures currently linked via data cable.
•
Press the ENTER button to confirm.
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
3.15 MANUAL MODE
It is possible to change the parameter value in the following way:
Reset
•
Press the button MENU so many times until the display shows
[MANUAL]
, then press the button
ENTER.
•
Press the button UP/DOWN to select
[RESET]
, press ENTER button to confirm the choice.
•
Select
[YES]
to carry out full fixture reset.
•
Press the ENTER button to confirm.
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
Manual control
•
Press the button MENU so many times until the display shows
[MANUAL]
, then press the button
ENTER.
•
Press the UP/DOWN button to select
[DMX VALUE]
, press ENTER button to confirm the choice.
•
Adjust the values of
[PAN]
,
[TILT]
,
[COLOR
],
[GOBO1]
,
[GOBO2]
,
[GOBO2ROT]
,
[PRI&ROT]
,
[FOCUS]
,
[DIMMER]
and
[STROBE]
in order to carry out manual control. Press the ENTER button to confirm the setting.
•
Press UP/DOWN button to select the desired value (
000-255
).
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
3.16 SERVICE
The parameters of the fixture described below can be changed in this way:
Settings lock
•
Press the button MENU so many times until the display shows
[SERVICE]
, then press the button ENTER.
•
Select in submenu
[ACCESS]
and press ENTER button to confirm the choice.
•
Press UP/DOWN button to select
[SETTINGS LOCK]
and press ENTER button.
•
Select
[ON]
or
[OFF]
through the buttons UP/DOWN to enable access to settings menu.
Service lock
•
Press the button MENU so many times until the display shows
[SERVICE]
, then press the button ENTER.
•
Select in submenu
[ACCESS]
and press ENTER button to confirm the choice.
Summary of Contents for Cromospot300
Page 1: ...EN IT Manuale Utente User Manual CROMOSPOT300 MOVING HEAD MENU ENTER UP DOWN 001 P1...
Page 29: ......
Page 59: ......
