Part Number 560361-020 Issue 1.0 November 2012.
12 of 13
3
System test (continued)
When this display is shown the display red LED
should operate.
Pressure is shown in bars. The pressure should
increase with additional load, or increased load
radius. Pressure should fall to zero when the
equipment rests on the ground.
Boom angle is shown in degrees. When a line
between the boom pivot pin and the arm pivot pin is
horizontal, this should show 0°. The angle will
increase as the boom is raised.
Arm angle is shown in degrees. When a line
between the arm pivot pin and the lifting tool pin is
vertical, this should show 90°. The angle will
decrease as the arm is moved outwards.
This display shows the time and date when the
system was initially commissioned.
Summary of Contents for Liftwatch 5
Page 2: ......
