6
FUEL SUPPLY
The whole reliability of the running engine system depends on a perfect fuel supply.
Using a high quality fuel pump
Using high quality valves
Hopper Tank
No filter before fuel pump
Largest cross-section of the fuel pipeline
ELECTRICAL CONNECTION DIAGRAM
STARTER
To start the engine you can use a fan or an electrical motor.
GLOWPLUG
Propane ignition
A modified conventional (hot range, non-idle bar) glow plug (Rossi #3) is appropriate. The glow plug is installed
on the engine without a washer. The glow plug is modified, so what to turns of the element extend beyond the
bottom of the plug. Using a pin, turn out two turns of the element. Make sure the plug glows brightly red. The
glow plug voltage is adjusted at Menue „Adjustment“.
Kerosene ignition
The glow plug voltage has to be adjusted to the burner-plug voltage.
Summary of Contents for Hornet-III
Page 1: ......
