7
VALVES
To realize the automatic start you could connect a propane /kerosene valve.
Further there is the opportunity to plug in a smoker valve.
IO-BOARD:
To lengthen the in-and output port and the serial port the io-board could be plugged in between the ECU and
GSU. The board should be mounted on a good accessible position.
Buzzer:
Short signal
: Power on message – GSU connected
Long signal
: Begin autostart (open propane supply)
Short interrupted signal : Battery power alarm/Temp.-Sensor fault/Glow plug fault
(Symbol at GSU)
Status-LED:
Green
: OFF
Orange
: READY
Red
: Engine in auto-mode
Button:
By pressing the button in OFF-mode the pump is turned on manually.
Summary of Contents for Hornet-III
Page 1: ......
