Projecta IS1210E, Manual

Page: 4 / 12

4
Part No. IS910E IS1210E
Battery
Battery Type Lithium Cobalt (LiCo)
Voltage 12 Volt only
Battery Capacity 6,600mAhr at 3.7V 13,500mAhr at 3.7V
24.4wHr at 3.7V 50.0wHr at 3.7V
2.2Ahr at 12.0V 4.5Ahr at 12.0V
Peak Amps 900A 1200A
Clamp Power 240A 330A
Number of Jumpstarts 7 Starts (Petrol) 14 Starts (Petrol)
(vehicle without a battery) 0 Starts (Diesel) 0 Starts (Diesel)
Number of Emergency Jumpstarts* 14 Starts (Petrol) 28 Starts (Petrol)
(with a flat vehicle battery) 0 Starts (Diesel) 5 Starts (Diesel)
Battery Cycles 500 500
USB Output
USB output 2.1A, 5.0V
USB low Voltage Disconnect Battery voltage at 9.0V
Jumpstarter Leads
Length Positive 23.5cm, Negative 16.5cm
Cable 8mm² 8(AWG)
Polarity Protection MCU controlled with Electronic Switch Smart Module
Overload Protection MCU controlled with Electronic Switch Smart Module
Recharging
Cable 1m long USB to Micro USB
Micro USB Charging port 2.1Amp micro USB charging port
3rd party 10W 240VAC USB adaptors can
be used. (Not Provided)
12V DC charging 12V to 5V 2.1Amp USB charger (provided)
Recharge time 4 hours 8 hours
Jumpstart Connection Voltages
Vehicle Voltage Range 0~15.0V
Dimensions, Weight & Environmental
Height 47mm
Width 178mm
Depth 91mm
Weight 0.61Kg 0.76Kg
Operating Temperature 0 to 45°C
Storage Temperature -20 to 40°C
Ingress Protection IP52 (Rain Proof) with covers over the ports
* Tested on a Ford Ranger 3.2L Diesel and Ford Territory 4.0L Petrol with a flat battery in good condition
SPECIFICATIONS