background image

1

ENGLISH

Infrared / Radio Remote

WTC-IR-LB

Installation instructions

Package contents

  Infrared or Radio remote control

  Two batteries already fi tted

  End-user manual

Installation precautions

Introduction

Read the instructions carefully before placing 
this device. The manufacturer declines all 
responsibility for any inconveniences or 
damages caused by not complying with 
instructions given in this manual. All warranty 
claims are void if instructions provided in this 
manual are not observed.

  Only qualifi ed installers should be allowed 

to install and service the equipment.

  All instructions provided in this manual 

should be read and followed.

  Incoming equipment should be carefully 

checked for possible damage caused 
during transport or by incorrect handling. 

In  case  of  damage,  fi le  a  claim  with  the 

transport company. 

General installation requirements

  After the installation, carry out a complete 

system check and explain all system 
functions to the user.

  Dispose of all packaging materials in 

accordance with all applicable local 
regulations.

Protection against electrocution

Take precautions to prevent electrostatic 
discharge to the device when installing, 
servicing or operating the equipment.

The English version of this document shall always prevail in case of any discrepancy between the English version and its translation.

Summary of Contents for WTC-IR-LB



































































Reviews: