![background image](http://html.mh-extra.com/html/carrier/wtc-ir-lb/wtc-ir-lb_installation-instructions-manual_2563918003.webp)
3
ENGLISH
Overview of remote control
General description
The remote control (WTC-IR-LB or
CA-TRF-CLS) is compatible only with
the dedicated receiver (WTC-ISP/-ISPL or
CA-CRF-XX) and fan coil units fitted with
the Water Terminal Controller.
This remote allows the user to manage
a number of comfort parameters of the
room, including lighting, blinds, temperature,
fan speed, or occupancy.
Please note that lighting and blinds control
is optional and can be enabled/disabled by
the installer.
■
The infrared remote control must be
directed towards the unit receiver when
sending the command.
■
No obstructions such as curtains or plants
should be between the control and the unit.
■
The maximum operating range for the
infrared remote control is approx. 5 m.
■
The maximum operating range for the
radio remote control is approx. 15 m in
building with “classical” walls and floors
(without metal), 150 m in open field.
General display
The general display depends on functions that
are enabled (see “Configuration” on page 6).
Batteries
The remote control operates with two 1.5 V
non-rechargeable batteries. When the battery
symbol OFF appears on the screen, this
indicates that the batteries are exhausted.
Example:
How to insert batteries:
1. Use the Phillips screwdriver to remove
four screws on the back of the remote
control.
2. Remove the cover and replace the
batteries.
The remote control uses two alkaline
batteries (1.5 V, LR03 AAA). The average
battery life during normal use is
approximately one year.
IMPORTANT
: The infrared or radio receiver is
not included in the package.
REMOTE CONTROL DISPLAY
Lights/Blinds command
sent to the controller
Displayed value
Lights control (optional)
Blinds control (optional)
Comfort temperature control
Fan speed control
Battery status