4
ADJUSTABLE CHARGE RATE
The charger’s output can be adjusted to suit the size of the battery for optimum
charging.
POWER SUPPLY
When Power Supply mode is selected, you can safely run an appliance or load from
your battery. An appliance can also be run directly from the battery clamps if required,
for example using the charger as a memory saver when disconnecting the battery
from the vehicle.
CHARGE STATUS INDICATOR
The CHARGING and FULLY CHARGED LEDs will illuminate and flash in various patterns
to indicate the different stages of charging. See below for flash patterns.
Soft Start 1
Soft Start 2
Bulk
Absorption/
Float
Blue LED
Charging
Green LED
Full
Red LED
Power
(Fast Flash)
Solid On: Normal
Flashing: Fault (See Faults & Errors, page 13)
(Slow Flash)
(Slow Flash)
CHARGING LED: blue LED illuminates and flashes during charging process.
FULLY CHARGED LED: green LED illuminates (solid) when fully charged.
POLARITY PROTECTION
Prevents the output leads from sparking due to accidental reverse connection or short
circuit making the charger safer to use around batteries.
OVER TEMPERATURE PROTECTION
If the temperature within the charger rises too high, the charger will begin to cool down
by turning on the fan, and if the temperature continues to rise it will begin reducing the
power output. If still unsuccessful, the charger will shutdown until it cools down.
SWITCHMODE TECHNOLOGY
Using the latest technology in battery chargers, switchmode chargers convert 240VAC
power to 12VDC power using electronic components unlike traditional battery chargers
that rely on heavy transformers. This allows the charger to be lightweight and compact
without sacrificing on performance.
