Project Food AKD200F, Installation, Operating And Service Instructions, Page: 24 / 72

- 24 -
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
INSTRUCTIONS
In accordance with Italian Legislative Decree 49/2014, which implements Directive 2012/19/EU,
the Manufacturer requires that the appliance be disposed of at authorized collection centers, to
avoid potential affects on the environment and to protect human health.
The symbol shown alongside indicates the need to dispose of the appliance according to
the WEEE requirements when it is scrapped.
WARNING!
To avoid any unauthorized use and the related risks, ensure that the appliance cannot be
reactivated before disposing of it. To do this, the appliance must be disconnected from the
power supply and the power supply cable must be cut.
5. Installation and operation of appliance
5.1 Electrical connection (plug-socket)
HAZARD! Live components!
All models have a power supply cable with a Schuko plug.
The appliance must only be connected to an electrical socket that is individually protected against
indirect contacts in compliance with the regulations in force in the country of use. Do not remove
the appliance’s plug by pulling the power supply cable.
The power supply cable must never be placed in contact with hot objects.
Do not spray water on the appliance and do not expose it to rain, water or any other source of
humidity. The appliance can cause injuries if it is not installed correctly. Before installing the
appliance compare the parameters of the local electricity mains supply with the technical data of
the appliance (see the identification plate on the rear of the appliance, Pic.2 - Section 8). Only
connect the appliance to the mains if the above-mentioned data correspond! All the safety
instructions must be complied with!

Ensure that the power supply cable does not come into contact with heat sources or sharp
edges and that it does not become blocked under the appliance. Ensure that the cable is laid
out properly, and not rolled up or bent.

The power supply cable must not be laid on carpets, tablecloths, mats or on other heat
insulating materials, nor covered or immersed in water or other liquids and it must be
positioned where it cannot be walked on.

Position the appliance so that the plug is always accessible.

Do not use extension cords, adapters or reducers.
5.2 Handling and positioning
Ensure that, from the point of view of the overall dimensions (see Table 1 - Section 9), the space
provided for the appliance allows its correct use and easy servicing as indicated in subsection 6.

Remove the appliance from the packaging, be sure to follow the instructions in Section 4
(Environmental notes) with regard to the storage and disposal of the packaging materials.

While always keeping the appliance level, move and position it on a stable and correctly
levelled surface (the height of the legs can be adjusted to compensate for any uneven
surfaces).