Rev: 05.21.18
Page 12
EuroLoft™ Bed Lift (Overhead) OEM
Operation
Prior to Operating the EuroLoft Bed Lift System
The bed lifting system must never be used while the vehicle is in motion.
1. Make sure the vehicle is parked, secured and stabilized before starting operations.
2. Set the parking brake, if applicable.
Lowering the Bed Lift
1. If installed, make sure the safety belts are unfastened.
2. Turn the key switch to the ON position (Fig. 22D) located on the key pad.
3. Press and hold the DOWN arrow-shaped button (Fig. 22B) on the key pad. A green LED light (Fig.
22C) on the key pad will turn on in the direction the bed is moving. The bed will keep moving until it
reaches the pre-set stop position.
NOTE: The bed will stop moving when the button is released. Continue to press and hold the button until
the stop position has been reached.
4. Release the DOWN arrow-shaped button.
5. Turn the key switch to the OFF position.
Fig. 22
D
Key
A
B
C
C
Raising the Bed Lift
1. Turn the key switch to the ON position (Fig. 22D) located on the key pad.
2. Press and hold the UP arrow-shaped button (Fig. 22A) on the key pad. A green LED light (Fig. 22C)
on the key pad will turn on in the direction the bed is moving. The bed lift will keep moving until it
reaches the pre-set stop position.
NOTE: The bed will stop moving when the button is released. Continue to press and hold the button until
the stop position has been reached.
3. Release the UP arrow-shaped button.
4. If installed, make sure the safety belts are fastened.
5. Turn the key switch to the OFF position.
Always make sure that the EuroLoft Bed Lift path is clear of people, pets and objects before and
during operation. Always keep away from the slide rails when the bed is being operated. Do not
allow people or pets on bed while bed is in motion.
