Proheat X30, Owner'S Handbook Manual

Page: 11 / 30

Page 10 X30 Owner’s Handbook
PFC Instructions
11:52AM
STANDARD
M
00:59
T1 T2 T3
MON 106F
00:59 T1 T2 T3
The “ ” button is used to turn the heater on and
off when desired regardless of set Timers.
Press “ ” to activate the heater. The Red
Manual Button LED will turn on and the heater
will operate indefinitely (factory preset).
If the Manual Mode Runtime has been set you
will see the remaining time left before the heater
automatically turns off.
When the heater has an active Flame the icon will
change to a black background. Pressing “ ”
button again will de-activate the heater. (The Red
LED will go out and the heater will turn off.)
When a Timer Mode is enabled you may see a
number of different screens depending on how
the Timer was programed (see Timer settings).
Press the “
” button repeatedly to toggle
through and activate T1, T2, T3 or Group Timers.
(Green Timer LED will turn on).
The Heater will switch on at the set program(s)
time, run for the set duration, then switch off
automatically.
If the heater has been turned on by a timer event,
Pressing “ ” button will turn the heater off but
leaves the timer(s) schedule active.
Pressing the “
” Button repeatedly to toggle
through and deactivate the current set timer
program(s) (Green Timer LED will go out and
screen will not show T1,T2,T3.
If a password has been set it may not be possible
to deactivate the scheduled timer(s).
For complete PFC information, please refer
to the PFC Installation and Operating
Instructions 949900 at www.proheat.com
N
otice
“Manual” and “Timer” cannot be active at the
same time. If
“ ”
is active and the “
”
button
is pressed, the heater will turn off and the Red
Manual Button LED will go out.
N
otice
m
aNual operatioN
t
imed
o
peratioN