Progressive Turf Equipment Slope-Pro, Operator'S Manual, Page: 61 / 112

57
IMPORTANT: DEALER MUST COMPLETE AND MAKE A COPY OF THIS FORM AND SUBMIT TO PROGRESSIVE
TURF EQUIPMENT WITHIN 5 DAYS OF DELIVERING THE EQUIPMENT TO VALIDATE WARRANTY.
DELIVERY AND LIMITED WARRANTY REGISTRATION FORM
Mail or fax to: PO Box 940, Seaforth, Ontario Canada N0K1W0 Fax: (519)527-2275
SLOPE-PRO
®
MACHINE INFORMATION
Machine
Identification
Serial Number Hour Meter
Reading
Date Delivered
yyyy/mm/dd
Dealer Authorized Dealer
Training
Print
Branch Location Representative Signature
CUSTOMER
Company Name Email
Address Phone
City Fax
State / Province Authorized Print
ZIP / Postal Code Customer
Representative
Signature
Pre-Delivery Check List – Performed by qualified Dealer representative for authorized Customer’s representative.
Refer to the Slope – Pro
®
machine Operator’s Manual for detailed instructions

Ensure Operator’s Manual is stored within
manual container

Check hydraulic tank level

Verify that all safety decals are legible

Check engine oil level

Check tracks

Check height adjustment

Check fuel level and tank security (both)

Verify that PTO clutch functions correctly

Check cooling area

Verify mower blades, spindles are in good
condition and properly secured

Check air cleaner and connections

Check drive belts

Verify that hoods and guards are in good condition
and in place
Authorized Customer Representative: please initial beside the following boxes, when the item(s) are demonstrated to you and only after
you fully understand the operation and / or significance of each item:
Showed location of and reviewed Operator’s Manual
and the limited warranty information, terms and
conditions
Instructed on the forward and reverse movement
and left and right steering functions
Understand the Warning, Danger and Caution
notifications identified in the warning decals and
Operator’s Manual
Engagement and disengagement of the mower
blades and cutting height adjustment
Instructed on all functions of the remote control,
including initial control communication and
identification of all functions
Understand the potential dangers of remote control
vehicle operation as identified in but not limited to
scenarios listed in the Operator’s Manual
Instructed on the proper starting, shut down and
emergency stop operation
Instructed on the maintenance requirements as
identified in the Operator’s Manual
As an authorized representative of the Customer, I hereby acknowledge acceptance of the above machine and that the machine was
verified against the above check list. I have read and understood the nature and extent of the limited warranty information provided. I have
been advised on and understand the proper operation, safety procedures, maintenance requirements, limitations and capabilities of this
equipment for which it was designed and described in the Operator’s Manual.
Authorized Customer Representative DATE
Print Signature yyyy/mm/dd