Progressive Turf Equipment Slope-Pro, Operator'S Manual, Page: 56 / 112

Slope-Pro
®
Operator’s Manual
52
Troubleshooting Guide
For problems specific to the engine or the remote control, refer to the
user manual for that component included with the manual set.
Machine Drive Belts and Spindles
Hydraulic Drive System
High Oil Temperature:
With the engine shut off, check for evidence of external oil leakage
around seals, housings, or hose connections. Also check for pinched or
kinked hoses that could restrict oil flow and cause excessive heat build-
up in the hydraulic oil.
Problem
Belt Slippage
Belt Squeal
Cause
– Improper belt tension
Remedy
– Adjust tension (Deck Belts)
– Inspect / Replace Belt / Auto Tensioner (Others)
– Ensure proper OEM belts are used.
– Oily belt drive
– Clean drive / Replace belts
Rapid Belt Wear
– Belt slippage
– Belt not located
properly in groove
– Increase belt tension
– Place belt properly in groove.
– Ensure proper OEM belts are used.
Overheated spindle
bearings
– Belt Slippage
– Excessive belt tension
– Worn bearings
– Increase belt tension
– Set belt tension properly
– Replace bearings
Problem
High Oil Temperature
Cause
– Hydraulic Oil Cooler Blockage
– Restriction / blockage in
mechanical track drive System
– Pinched / Kinked Hose
Remedy
– Clean debris from cooler face & core.
– Inspect & Repair
– Inspect & Repair
Slow / Sluggish
Response,
Unusual Noise
– Low oil level
– Worn pump drive belt
– Clogged oil filter
– Air in Hydraulic Oil – Top-up oil level
– Inspect / Replace Belt or Auto Tensioner
– Replace filter
– Top-up oil level, inspect suction hose
No Drive
– Low oil level
– Worn / missing pump drive belt
– Clogged oil filter
– Improper electrical connection
to pump
– Low Charge Pressure
– Top-up oil level
– Inspect / Replace Belt or Auto Tensioner
– Replace filter
– Inspect / repair electrical system
– See qualified service personnel
Troubleshooting Guide