Progression Fitness TM9450, Owner'S Manual

Page: 7 / 35

7
Figure 3: Right Upright Installation
3. Slide the right upright onto the base
frame. Secure the right upright to the
base frame by using four bolts M10x25
and four washers #10.
Assembly
Bolt M10x25
Washer #10
Figure 4: Console Assembly
4. Feed the wires coming out of left side of
the console through the hole located on the
tube of the left handlebar. Connect the
EKG harness and the toggle harness com-
ing from the handlebar to the EKG harness
and the toggle harness coming from the
console. Secure the left handlebar to con-
sole using two bolts M8x52 and two wash-
ers #8.
Feed the wires coming out of the right side
of the console through the hole located on
the tube of the right handlebar. Connect
the EKG harness and the toggle harness
coming from the handlebar to the EKG har-
ness and the toggle harness coming from
the console. Secure the right handlebar
to console using two bolts M8x52 and two
washers #8.
EKG
Harness
Toggle
Harness
Console
Harness
EKG
Harness
Toggle
Harness
Bolt M8x52
Washer #8
NOTE:
Make sure not to pinch or screw
through any wires when securing the left
handlebar.