6.
Place the connector and fasten it by means of the nut on the outside, and the glower on the inside.
7.
Reconnect the two cables disconnected at point 3.
8.
Place the SIM card as shown in the photo.
9.
Place the adhesive support for the flange as shown in the photo.
10.
Close the controller and place the screws removed in point 2.
11.
Connect the antenna by placing it at a high point so that it has the best visibility towards the GSM/GPRS
central and to achieve correct coverage.
12.
If all the steps have been carried out, the installation of the GPRS modem is already completed, you
only need to power up the controller and carry out the corresponding configuration.
Do not power the controller without first connecting the antenna, as the modem may
be damaged
R-2344
