background image

 

- Option with outlets for latch valves (pulses) and 

minimum electric consumption. Due to its low elec-
tric consumption of the equipment and its electro-
valves, this version is very suitable for installations 
which work with a battery and which have not got 
diesel engines or solar panels. 

- Optional distance management via SMS mes-

sages, with modem GSM/GPRS included. Also, op-
tional links to a PC or an irrigation network pro-
gram. 

 

WARRANTY 

The AGRÓNIC 2000 irrigation controller meets all 

the norms set by the EC.  

The products created by PROGRÉS enjoy a two-

year warranty against all manufacturing defects. 

Compensation for direct or indirect damage 

caused by the use of the equipment is excluded from 
the warranty. 

 
 

2. INTRODUCTION TO THE MANUAL 

 

is a complete irrigation system whose 

capacity an specifications the user and installer 
should know in order to get the most out of it. For this, 
we recommend a detailed reading of this manual. 

 

The most important chapters are: 

 

2 Introduction 
4 Installation 
6 Parameters 
7 Use 

 

The INTRODUCTION is where you are at this 

moment and we recommend a thorough reading both 
for installers and users. 

The INSTALLATION is the chapter directed at the 

installer who has to connect the equipment to the 
other elements, which comprise the automatic irriga-
tion system. 

PARAMETERS is the chapter which explains how 

to configure and set up the system for the particular 
needs of each installation. This is work for the installer 
but it is also interesting for the user in case any pa-
rameters have to be modified after the installation of 
the equipment. 

The USE is the chapter aimed basically at the 

user where all the instructions for programming will be 

found. 

Start reading the chapter which best suits you, 

according to your condition of installer or user. 

Before installing the unit, it should be checked to 

see that it corresponds with your requirements. 

This can be done by checking that the identifica-

tion labels correspond with the desired model. 

To decide on the necessary model (number of 

outlets), the irrigation sectors needed, the number of 
fertilizers, mixers, fertilizer pump and filters which are 
to be used, have to be added up. 

 

 
Examples: 

-

 

If we have 2 irrigation sectors, 1 fertilizer and 2 
filters, the model 2006 is sufficient (2+1+2 
=5). 

-

 

If we have 3 sectors, 2 fertilizers, 1 mixers and 
2 filters, the model 2012 is needed (3+2+1+2 
=8). 

 

The equipment has an alphanumeric screen with 

40 characters, which shows: the questions that the 
controller asks the user, his answers, the stored pa-
rameters and programs, the current performances, the 
applied water and fertilizer quantities, the malfunctions 
and incidents, etc.  

It has also got a keyboard with 14 keys, which is 

used to access the equipment, to configure, program, 
correct, consult, erase, activate, deactivate, etc. 

The keys from 0 to 9 should be pressed when-

ever it is necessary to enter a number. 

The same keys also show the initials of the days 

of the week and they will be used whenever it is nec-
essary to enter one day in the controller. 

There are two keys with the words "YES" and 

"NO" which will be pressed, in a few cases, when one 
option or other has to be chosen (and when indicated 
on the screen) . 

There is also a key with an arrow which is used 

for moving fast through the sector numbers and pro-
grams as will be explained later. 

The "ENTER" key is used to confirm the validity of 

the data previously entered and shown on the screen 
with the cursor below it or displayed intermittently on 
the screen. This key is bigger as it is used constantly. 

The "VIEW" key is used to consult anomalies 

stored in the controllers memory, the current state of 
the inputs/outlets, etc. 

The "FUN" key is used for entering into the four 

basic functions of the controller: PROGRAMS (auto-
matic control by means of the programs entered), 
MANUAL (control by manual orders to be carried out 
immediately), PARAMETERS (configuration of the 
equipment to the particular needs of the installation) 
and TOTALS (access to the internal counters for the 
time and volume of the water and the fertilizer ap-
plied). 

 
 

Summary of Contents for Agronic 2000 Series

























Reviews: