System Configuration Preva
18
System Configuration
System Configuration Mode
About System
Configuration
Mode
The Preva Dental X-Ray System has a software-driven system configuration
mode. When the Preva is in system configuration mode, you can perform the
following procedures:
•
Adjusting
the
Display
•
Changing Pre-programmed Exposure Settings
•
Changing the Cone Size
•
Showing Current System Configuration
•
Displaying
Diagnostic
Data
Using System
Configuration
Mode
1. To enter system configuration mode, depress the Tooth Selection and
Patient Size Selection buttons on the Operator Panel simultaneously for 5
seconds. The display shows the Main System Configuration menu, as shown
in Figure 3, and the Ready Indicator blinks.
2. To select menu items while in system configuration mode, use the up and
down arrows to highlight a menu option. Then use the right arrow button as
an Enter button to select the highlighted option. When changing presets, the
right arrow button is also used to select the technique factor.
3. After selecting a menu option, use the up and down arrows to increase or
decrease values.
Figure 3
Main System
Configuration Menu
