System Configuration Preva
17
Changing Language
Five languages are preprogrammed in the display panel. To change follow the
steps below.
1. Push and hold the Tooth and Patient selection switches, a menu
screen will appear after about 5 seconds. (See Figure 34A)
2. Using the down arrow highlight “Configure Unit” and press the right
arrow key. (See Figure 34)
3. “Select Languages” on the next screen is highlighted press the right
arrow key.
4. Select the desired language and press the right arrow key. If you do
not see your desired language listed arrow down to “More” and press
the right arrow key.
5. After selection arrow down to Exit and press the right arrow key then
repeat this procedure to return to the main screen.
Figure 34A
Preva Operator
Panel
