19
STEP 8
8A Connecting The Tension Cable From The Knob To The Tension Cable:
First turn the
Tension Control Knob (37)
to the lowest setting COUNTER-CLOCKWISE. Hook the end of the
resistance cable connected to the
Tension Control Knob (37)
to the
Tension Cable (79),
see
Figure D
. Insert the remaining cable at the end of the
Tension Control Knob (37)
in to the slot on
top of the
Tension Cable (79),
See
Figure E
. Turn the
Tension Control Knob (37)
to the highest
setting (turn it CLOCKWISE), then remove the
Clip
(101)
from the
Tension Cable (79).
Safely
dispose of the
Clip (101)
.
Caution:
Do not force the
Tension Control Knob (37)
beyond its lowest or highest settings. Refer
to our Operations & Adjustments Page 23.
8B
Mounting The Tension Control Knob:
Mount the
Tension Control Knob (37)
to the
Hand
Pulse Support Frame (41)
as shown in
Figure F.
Secure the
Tension Control Knob (37)
to the
Hand Pulse Support Frame (41)
with the
Cross Recessed Pan Head Screw (100).
Tighten the
screw with the
Multi-Hex Tool with Phillips Screwdriver
until it is firm and secure.
8C Installing The Bottle Holder:
Attach the
Bottle Holder (40)
onto the
Hand Pulse Handlebar
Support Frame (41)
with two
Bolts (38)
. Tighten both
Bolts (38)
using the
Multi Hex Tool with
Phillips Screwdriver
.
.
(38) Bolt
2PCS
(100) Cross Recessed Pan
Head Screw
1PC
ASSEMBLY
HARDWARE PACK
Multi Hex Tool with Phillips
Screwdriver
TOOL
Figure D
Figure E
Figure F
Summary of Contents for Air Elliptical 1307
Page 5: ...3 LABEL PLACEMENT...
Page 8: ...6 OVERVIEW DRAWING...
Page 11: ...9 HARDWARE TOOLS PACK...