Step P:
Install the Tension Control Knob (37) by inserting the tab into a square hole
on the Hand Pulse Handlebar Support Frame (41) and push down on the knob
slightly in order to align the opening with the bolt hole. Using the screwdriver, tighten
one M5 Bolt (38) until firm. See Figure D.
Step Q:
Attach the Bottle Holder (40) onto the Hand Pulse Handlebar Support Frame
(41) with two M5 Bolts (39). Using the screwdriver, tighten bolts until firm.
Step R:
Attach the Hand Pulse Handlebar (33) onto the top end of the Hand Pulse
Handlebar Support Frame (41) with two M8 Bolts (36), two Spring Washers (80), and
two Curve Washers (81). Using the #6 Allen Wrench with Phillips Screwdriver, tighten
the bolts until firm.
Hardware:
14
ASSEMBLY
(36) M8x35 Bolt
4 PCS
(36) M8x35 Bolt
2 PCS
(80) Ø8 Spring Washer
2 PCS
(81) Ø8xØ16x2 Curve Washer
2 PCS
(38) M5x15 Bolt
1 PC
(39) M5x10 Bolt
2 PCS
Hand Pulse Handlebar Support Frame Hardware (Step L)
Bottle Holder Hardware (Step Q)
Hand Pulse Handlebar Hardware (Step R)
Tension Control Knob Hardware (Step P)
