Progear Fitness 555LXT, Owner'S Manual

Page: 15 / 21

5. Front Post Installation
A. Remove four Hex Bolts (16), four Spring Washers (72), two Flat Washers (17) and
two Curved Washers (18) from the Main Frame (1).
B. Connect the Sensor Inductor (33) and Sensor Wire (69); See Figure A.
C. Tuck the excess cable of the Sensor Inductor (33) and the Sensor Wire (69) into the
tube of the Main Frame (1)
D. Slide the Front Post (2) onto the Main Frame (1).
E. Align the holes of the Front Post (2) and Main Frame (1).
F. Fasten the Front Post (2) to the Main Frame (1) with the four Hex Bolts (16), four
Spring Washers (72), two Flat Washers (17), and two Curved Washers (18) that
were previously removed. Then tighten by using the 6mm Allen Wrench provided.
NO. 76 Allen Wrench
6mm 1PC
ASSEMBLY
13