AIr Remote TTL-N
14
www.profoto.com
Test sync
• Press the Test button [6] to manually transmit a sync signal.
other
factory reset
Reset the Air Remote TTL-N to factory settings:
• Switch off the Air Remote TTL-N.
• Press and hold down the TEST button [5] and the ON button [1] simultaneously.
Battery check & built-in power saving
The low battery symbol is displayed when the battery voltage reaches a critical level.
To save battery, the display automatically switches off after 30 seconds of inactivity. Press
the ON button [1] to switch on the display. The display also switches on when any of the
function buttons are used.
Check firmware version
Press and hold the MODE button [6] for 10 seconds when turning the remote on.
Change firmware version
Create a free user account at profoto.com/myprofoto to register your product and
download the latest upgrades.
