VOICE MESSAGE
www.profort.com
Pg.
6
Record messages
1.
Call the unit
2.
Await a tone
3.
Type in a password (e.g. 1234), optional
4.
Await two tones
5.
Type in no. of the message that needs to be recorded, e.g. #8 (for general message)
6.
Await a tone
7.
Record message
8.
Await two tones
9.
The call can be ended or a new voice message can be recorded, e.g.:
10.
Press #1 (opens for input 1)
11.
Await a tone
12.
Record the voice message for input 1
13.
Repeat point 9-11 for more messages, if needed
14.
Hang up
If “send different voice messages by break and close” or command
1234 W2
is selected, point 6-7 is
performed twice. First record message for ‘break’ (3 secs.), await tone, record message for ‘close’ (3 secs.).
In case of incorrect password the unit disconnects and you’ll have to dial up again.
Codes for recording of voice
messages
#8 General message
6 sec.
Digital inputs
#0 for input 0
6 sec.
#1 for input 1
6 sec.
#2 for input 2
6 sec.
#3 for input 3
6 sec.
#4 for input 4
6 sec.
#5 for input 5
6 sec.
#6 for input 6
6 sec.
#7 for input 7
6 sec.
Analog inputs
#91: analog input 1
6 sec.
#92: analog input 2
6 sec.
System alarm
#94: power failure
3 sec.
#95: power ok
3 sec.
#96: sabotage
3 sec.
#97: connecting
3 sec.
#98: disconnecting
3
sec.
