background image

18

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving 

it requires two persons. Stand in front of the elliptical, 

hold the upright, and place one foot against one of the 

wheels. Pull on the upright and have a second person 

lift the handle until the elliptical will roll on the wheels. 

Carefully move the elliptical to the desired location, and 

then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical 

rocks slightly 

on your floor 

during use, 

turn one or 

both of the 

leveling feet 

beneath the 

rear of the 

frame until the rocking motion is eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder was designed for 

use with most full-size tablets. Do not place any 

other electronic device or object into the tablet 

holder.

To insert a tablet into 

the tablet holder, set 

the bottom edge of the 

tablet in the tray. Make 

sure that the tablet is 

firmly secured in the 

tablet holder. Reverse 

these actions to 

remove the tablet from 

the tablet holder.

Pull on the 

upright

Lift 

here

Place 

your foot 

here

Leveling 

Feet

Summary of Contents for PFEVEL12716.0













































Reviews: