5
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
1.
Attach a Base Foot (32) to a Stabilizer (6) with an
M4 x 16mm Screw (52).
Attach a Support (7) to the Stabilizer (6) with two
M10 x 93mm Button Bolts (45), an M10 Washer
(53), an M10 Nylon Locknut (56), and an M10
Nylon Jamnut (69).
Attach an Upright Foot (33) to a Stabilizer (6) with
two M10 x 68mm Button Bolts (64), four M10
Washers (53), and two M10 Nylon Locknuts (56).
Make sure that the Bolts are inserted from the
right side. Do not tighten the Locknuts yet.
Repeat this step with the other Stabilizer (6)
and Support (7). Make sure that the M10 x
68mm Button Bolts (64) are inserted from the
left side.
1
64
33
53
53
7
56
56
53
52
69
6
32
45
45
Before beginning assembly, make sure that
you understand the information in the box
above. For help identifying small parts, use
the PART IDENTIFICATION CHART.
