6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
See the inset drawing.
Orient the Left Upright
Spacer (90) so that the two curved corners are
in the position shown. Set the Left Upright
Spacer on the Base (94).
Hold a Screw Spacer (88) inside the lower end
of the Left Upright (82). Insert a 3/8" x 5 1/2"
Screw (7) with a 3/8" Star Washer (11) into the
Left Upright and the Screw Spacer.
Repeat this
step with a second Screw Spacer (88), 3/8" x
5 1/2" Screw (7), and 3/8" Star Washer (11).
Hold the Left Upright (82) against the Left
Upright Spacer (90). Tighten the 3/8" x 5 1/2"
Screw (7) until the heads of the Screws touch
the Upright;
do not fully tighten the Screws
yet.
90
82
7
94
88
11
6
9
5. Hold a Screw Spacer (88) inside the lower end
of the Right Upright (83). Insert a 3/8" x 5 1/2"
Screw (7) with a 3/8" Star Washer (11) into the
Right Upright and the Screw Spacer.
Repeat
this step with a second Screw Spacer (88),
3/8" x 5 1/2" Screw (7), and 3/8" Star Washer
(11).
Hold the Right Upright (83) against the Right
Upright Spacer (91).
Be careful not to pinch
the Upright Wire (85) or the ground wire.
Tighten the 3/8" x 5 1/2" Screws (7) until the
heads of the Screws touch the Upright;
do not
fully tighten the Screws yet.
83
85
11
88
7
5
90
Curved
Corners
91
55
