POWER SUPPLY:
When batteries have been replaced, the
display shows 12:00. Set the time or
wait for a new call.
After the battery replacing, the Caller-ID
memory is empty. We recommend to
first read the memories prior to change
the batteries.
Do not just throw away empty
batteries but hand them over
to your local depot for chemical
waste.
PABX:
In case your PABX is not capable to
pass the Caller-ID signals, than the
TX-160 must be connected directly to
the CO-line.
27
TIPS & REMARKS
Do not locate the telephone in direct
sunlight or in a moist environment.
Never use chemical cleansers to clean
the cabinet, the cabinet may only be
cleaned with a moist cloth.
Don't place the TX-160 on furniture with
a cellulose based coating; the rubber
feet will leave stains on the cellulose.
Under certain circumstances the sound
of the TX-160 might be influenced by
electromagnetic fields of electronic devi-
ces like TV, computer or radio transmit-
ters close to the telephone. Relocate the
telephone to gain better results in such
cases.
MAINTENANCE
WARRANTY CARD
The warranty card is printed on page 36
